Supermicro X8DTL-IF - Dual Xeon Workstation Mainboard SOCKET 1366 (chạy xeon 5500 và 5600 series)

2,600,000₫
Tình Trạng: Còn Hàng

Tình trạng: Likenew no box 99%

Bảo hành: 01/03/05 tháng (mặc định 01 tháng)

 


Key Features


1. Intel® Xeon® processor 5600/5500
    series, with QPI up to 6.4 GT/s


2. Intel® 5500 (Tylersburg) Chipset


3. Up to 96GB** DDR3 1333/ 1066/
    800MHz ECC Registered DIMM / 24GB
    Unbuffered DIMM


4. Dual Intel® 82574L Gigabit
    Ethernet Controller


5. 6x SATA2 (3 Gbps) Ports via
    ICH10R Controller


6. 2 (x8) PCI-E 2.0 (1 in x16 slot),
    1 (x4) PCI-E 2.0 (in x8 slot),
    1 (x4) PCI-E (in x8 slot),
    2x PCI 33MHz slots


7. Integrated Matrox G200eW Graphics


8. Integrated IPMI 2.0 with Dedicated LAN


Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options.
MBD-X8DTL-iF -O
  • X8DTL-iF (Standard Retail Pack)
MBD-X8DTL-iF -B
  • X8DTL-iF (Bulk Pack)
 
Physical Stats
Form Factor
  • ATX
Dimensions
  • 12" x 10" (30.5cm x 25.4cm)
 
Processor/Cache
CPU
  • Dual 1366-pin LGA Sockets
  • Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
    • Intel®
      Xeon®Processor 5600 Series (Westmere)
    • Intel®
      Xeon®Processor 5500 Series (Nehalem-EP)
QPI
  • up to 6.4 GT/s
 
System Memory
Memory Capacity
  • 6x 240-pin DIMM slots
  • Supports up to 96 GB** 1333 / 1066 / 800MHz DDR3 ECC Registered memory
  • Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
  • Memory Mirroring supported
Memory Type
  • 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB , 8GB** , 16GB**
Memory Voltage
  • 1.5 V / 1.35 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
 
On-Board Devices
Chipset
  • Intel® 5500 (Tylersburg) chipset
  • ICH10R + IOH-24D
SATA
  • Intel ICH10R SATA 3.0Gbps Controller
  • RAID 0, 1, 5, 10 support (Windows)
  • RAID 0, 1, 10 support (Linux)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Winbond® WPCM450 BMC*
Network Controllers
  • 2x Intel® 82574L Gigabit Ethernet Controllers
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
  • Matrox G200eW
Super I/O
  • Winbond® 83627DHG-P chip
 
Input / Output
Serial ATA
  • Six Serial ATA ports
  • Six SATA hard drives supported
LAN
  • 2x RJ45 LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 2x USB rear ports
  • 1x USB on-board
  • 2x USB internal headers
  • Total 5 USB 2.0 Compliant
VGA
  • 1x VGA Port
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Port / Header
  • 1 Fast UART 16550 serial port
  • 1 Fast UART 16550 serial header (Option)
Chassis ( Optimized for X8DTL-iF )
1U Chassis
2U Chassis
3U Chassis
Tower / 4U Rackmount
Important Chassis Notes
  • To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details.
 
Expansion Slots
PCI-Express
  • 2 (x8) PCI-E 2.0 (1 in x16 slot)
  • 1 (x4) PCI-E 2.0 (in x8 slot)
  • 1 (x4) PCI-E (in x8 slot)
PCI
  • 2x 33MHz PCI slots
 
System BIOS
BIOS Type
  • 32Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • PCI 2.2
  • ACPI up to 3.0
  • USB Keyboard support
 
Management
Software
  • IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
  • SuperDoctor® III
Power Configurations
  • ACPI / ACPM Power Management
 
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
  • 4-Phase-switching voltage regulator
FAN
  • Total of six fan headers supporting up to 6 fans
  • Six 4-pin fan headers
  • 6x fans with tachometer status monitoring
  • Support 3-pin fans (w/o speed control)
  • Low noise fan speed control (4-pin fan only)
Temperature
  • Monitoring for CPU and chassis environment
  • Thermal Control for 6x fan connectors
  • PECI
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
 
Operating Environment
Environmental Spec.
  • Operating Temperature: 10° to 35° C (50° to 95°F)
  • Non-operating Temperature: -40° to 70° C (-40° to 158° F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5 to 95% (non-condensing)
Parts List (Retail Pack)
 Part NumberQtyDescription
X8DTL-iFMBD-X8DTL-iF -O1X8DTL-iF Motherboard
I/O Cable 1CBL-0044L657.5CM SATA FLAT S-S PBF
I/O ShieldMCP-260-00027-0N1STD I/O SHIELD FOR X8, H8, X7SB3 SERVER MB (3RD LAN + 4XLAN)
ManualMNL-1076-QRG1X8DTL-3/I(F)/X8DTL-3/I-II QUICK REFERENCE GUIDE

Note:  Items in a Standard Retail Package may differ from items in a Standard Bulk Package.

** Please check 'Tested Memory List' for compatibility

Scroll To Top

params.svg
Panel Tool
Float header
Default Boxed Large Boxed Medium