SSD Gigabyte 120GB 2.5 Inch Sata 3

• Interface

  SATA 6.0Gb/s

• Form Factor

  2‎.5-inch internal SSD

• Total Capacity

  1‎20GB

• Warranty

  Limited 3-year or 75TBW

• NAND

  NAND Flash

• External DDR Cache

  N/A

• Sequential Read speed

  up to 500 MB/s ; Minimum 350 MB/s

• Sequential Write speed

  up to 380 MB/s ; Minimum 280 MB/s

• Random Read IOPS

  Up to 50k

• Random Write IOPS

  Up to 60k

• Dimension

  6‎9.85 x 7 x 100 mm

• Mean time between failure (MTBF)

  2‎M hours

• Power Consumption (Active)

  Average: R : 2240mW; W : 2610mW

• Power Consumption (Idle)

  1‎70mW

• Temperature (Operating)

  0‎°C to 70°C

• Temperature (Storage)

  -40°C to 85°C

• Note

  * Test system configuration: configuration may vary by models, we will choose the latest platform for verification.
  * Performance may vary based on SSD's firmware version and system hardware & configuration. Sequential performance measurements based on CrystalDiskMark v.5.1.2 and I0meter 1.1.0.
  * Speeds based on internal testing. Actual performance may vary.
  * TBW (Terabyte Written):Terabytes Written" is the total amount of data that can be written into an SSD before it is likely to fail.
  * 1GB = 1 billion bytes. Actual useable capacity may vary.
  * 3 years or 75 TBW, whichever comes first.

* The entire materials provided herein are for reference only. GIGABYTE reserves the right to modify or revise the content at anytime without prior notice.
* Advertised performance is based on maximum theoretical interface values from respective Chipset vendors or organization who defined the interface specification. Actual performance may vary by system configuration.
* All trademarks and logos are the properties of their respective holders.
* Due to standard PC architecture, a certain amount of memory is reserved for system usage and therefore the actual memory size is less than the stated amount.