| Product SKUs |
| MBD-X10DAi |
X10DAi |
| Physical Stats |
| Form Factor |
E-ATX |
| Dimensions |
12" x 13" (30.5cm x 33.0cm) |
| Processor/Cache |
| CPU |
Intel® Xeon® processor E5-2600 v3, Intel® Xeon® processor E5-2600 v4. |
| Dual Socket LGA-2011-3 (Socket R3) supported, CPU TDP support Up to 160W TDP, 1 QPI up to 9.6GT/s |
| Cores / Cache |
Up to 22 cores † / Up to 55MB† cache |
| Note |
† BIOS version 2.0 or above is required |
| Note |
** Motherboard supports this maximum TDP. Please verify your system can thermally support. |
| System Memory |
| Memory Capacity |
1TB 3DS ECC/non-ECC RDIMM, DDR4-2400MHzUp to 2TB 3DS ECC LRDIMM, DDR4-2400MHz, in 16 DIMM slots |
| Memory Type |
2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes |
RDIMM: 4GB, 8GB, 16GB, 32GB |
| LRDIMM: 32GB, 64GB |
| 3DS LRDIMM: 128GB |
| Memory Voltage |
1.2V |
| Error Detection |
Corrects single-bit errors |
| On-Board Devices |
| Chipset |
Intel® C612 |
| SATA |
Intel® C612 controller for 10 SATA3 (6 Gbps) ports; RAID 0,1,5,10 |
| AHCI SATA |
SATA3 (6Gbps); RAID 0, 1, 5, 10 |
| SCU SATA |
SATA3 (6Gbps); RAID 0, 1, 5, 10 |
| Network Controllers |
Dual LAN with Intel® i210 Gigabit Ethernet Controller |
| Audio |
RealTek ALC1150 HD Audio |
| Input / Output |
| SATA |
10 SATA3 (6Gbps) port |
| LAN |
2 RJ45 Gigabit Ethernet LAN ports |
| USB |
5 USB 2.0 ports (2 rear + 2 via headers + 1 Type A) |
| 6 USB 3.0 ports (4 rear + 2 via headers) |
| TPM |
1 TPM Header |
| Expansion Slots |
| PCI-E |
3 PCI-E 3.0 x16, |
| 2 PCI-E 3.0 x8 |
| 1 PCI-E 2.0 x4 (in x8 slot) |
| System BIOS |
| BIOS Type |
128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features |
Plug and Play (PnP) |
| PCI 2.3 |
| ACPI 1.0 / 2.0 / 3.0 / 4.0 |
| SMBIOS 2.7.1 |
| UEFI 2.3.1 |
| Management |
| Software |
NMI, SuperDoctor® 5, Watchdog |
| Power Configurations |
ACPI Power Management |
| Power-on mode for AC power recovery |
| PC Health Monitoring |
| Voltage |
+12V, +3.3V, +5V, +5V standby, 3.3V standby, 6 Phase-switching voltage regulator |
| FAN |
8x 4-pin fan headers (up to 8 fans), 8x fans with tachometer monitoring, Pulse Width Modulated (PWM) fan connectors, Status monitoring for speed control |
| Temperature |
CPU thermal trip support, Monitoring for CPU and chassis environment, Thermal Monitor 2 (TM2) support, PECI, Thermal Control for 8 Fan Connectors |
| LED |
CPU / System Overheat LED, Suspend static indicator LED, UID/Remote UID |
| Other Features |
Chassis intrusion detection, Chassis intrusion header, RoHS, SDDC |
| Operating Environment |
| Operating Temperature Range |
10°C - 35°C (50°F - 95°F) |
| Non-Operating Temperature Range |
-40°C - 70°C (-40°F - 158°F) |
| Operating Relative Humidity Range |
8% - 90% (non-condensing) |
| Non-Operating Relative Humidity Range |
10% ~ 95% (non-condensing) |
