|
Product SKUs
|
| MBD-X11DPL-i |
X11DPL-i |
| Physical Stats |
| Form Factor |
ATX |
| Dimensions |
12.076" x 10.15" (30.67cm x 25.78cm) |
| Processor/Cache |
| CPU |
2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors |
| Dual Socket LGA-3647 (Socket P) supported, CPU TDP support Up to 140W TDP, 2 UPI up to 10.4 GT/s |
| System Memory |
| Memory Capacity |
Up to 2TB 3DS ECC RDIMM, DDR4-2933MHz; Up to 2TB 3DS ECC LRDIMM, DDR4-2933MHz, in 8 DIMM slots |
| Memory Type |
2933/2666/2400/2133MHz ECC DDR4 RDIMM, LRDIMM |
| DIMM Sizes |
RDIMM: 64GB |
| LRDIMM: 128GB |
| 3DS LRDIMM: 128GB, 256GB |
| Memory Voltage |
1.2V |
| Error Detection |
Corrects single-bit errors |
| On-Board Devices |
| Chipset |
Intel® C621 |
| SATA |
Intel® C621 controller for 10 SATA3 (6 Gbps) ports; RAID 0,1,5,10 |
| IPMI |
ASPEED AST2500 |
| Network Controllers |
Dual LAN with 1GbE with Intel® X722 + Marvell 88E1512 |
| Graphics |
Aspeed AST2500 BMC |
| Input / Output |
| SATA |
10 SATA3 (6Gbps) port |
| LAN |
2 RJ45 Gigabit Ethernet LAN ports |
| USB |
4 USB 2.0 ports (2 rear + 2 via headers) |
| 3 USB 3.2 Gen1 ports (2 via headers + 1 Type A) |
| Video Output |
1 VGA port |
| Serial Port / Header |
1 COM Port (1 header) |
| TPM |
1 TPM Header |
|
Expansion Slots
|
| PCI-E |
2 PCI-E 3.0 x16, |
| 3 PCI-E 3.0 x8, |
| 1 PCI-E 3.0 x4 (in x8 slot) |
| M.2 |
M.2 Interface: 1 SATA/PCI-E 3.0 x4 |
| Form Factor: 2260, 2280 |
| Key: M-Key |
| System BIOS |
| BIOS Type |
AMI UEFI |
| Management |
| Software |
Intel® Node Manager, IPMI2.0, KVM with dedicated LAN, NMI, SPM, SSM, SUM, SuperDoctor® 5, Watchdog |
| Power Configurations |
ACPI Power Management |
| PC Health Monitoring |
| Voltage |
+12V, +3.3V, +5V, +5V standby, 3.3V standby, 8 -fan status, Chassis intrusion header, Monitors CPU voltages, Supports system management utility |
| FAN |
8x 4-pin fan headers (up to 8 fans), Overheat LED indication, PWM fan speed control |
| Temperature |
CPU thermal trip support, PECI |
| LED |
CPU / System Overheat LED, UID/Remote UID |
| Other Features |
ACPI power management, ATX Power connector, Chassis intrusion detection, Chassis intrusion header, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, Node Manager Support, SDDC, UID |
| Operating Environment |
| Operating Temperature Range |
10°C - 35°C (50°F - 95°F) |
| Non-Operating Temperature Range |
-40°C - 70°C (-40°F - 158°F) |
| Operating Relative Humidity Range |
8% - 90% (non-condensing) |
| Non-Operating Relative Humidity Range |
5% - 95% (non-condensing) |
