| Dimensions |
W: 210mm H: 435mm D: 428mm (without feet)
W: 210mm H: 460mm D: 428mm (with feet) |
| Material(s) |
SGCC Steel, Tempered Glass |
| Weight |
7.5 kg |
| Motherboard Support |
Mini-ITX, MicroATX, ATX |
| Front I/O Ports |
1x USB 3.1 Gen 2 Type-C
1x USB 3.1 Gen 1 Type-A
1x Headset Audio Jack
Front I/O internal header
1x USB 3.1 Gen 2 Internal Header
1x USB 3.1 Gen 1 Internal Header
1x USB 2.0 Internal Header
1x HD Audio Header |
| Filters |
All Air Intakes |
| Smart Device V2 |
3x Fan channels with Max 10W per channel output*
2x RGB LED channels, each support up to 4x HUE 2 addressable LED strips or 5x Aer RGB 2 fans
Built-in noise detection module
*Note : If a splitter is used, fan control is regulated depending on the fan connected to the 4-pin port . Do not use low-noise adapters. |
| RGB LED Lighting |
2x Integrated Aer RGB 2 140mm Fans
1x Integrated addressable LED Strip |
| Vertical GPU Mount |
2 Slots |
| Drive Bays |
2.5": 2+1
3.5": 2+1 |
| Expansion Slots |
7 |
| Radiator Support |
Front: 2x 140 or 2x 120mm with Pull
*Note: Need to remove RGB fans if you plan to mount the radiator to the front
Rear: 1x 120mm |
| Fan Support |
Front: 2x 120/ 2x 140mm (2x AER RGB 2 140mm included)
Top: 1x 120mm/ 1x 140mm (1x AER F140 Case Version Included)
Rear: 1x 120mm (1x AER F120 Case Version Included) |
| Fan Specs |
Aer RGB 2 (140mm)
Speed: 500-1,500 RPM
Airflow: 30.39 - 91.19 CFM
Noise: 22 - 33 dBA
Air Pressure: 0.17 – 1.52mm-H2O
Bearing: Fluid Dynamic Bearing
Fan Connector 4-Pin PWM |
| Clearance |
Cable Management: 19-23mm
GPU Clearance: Up to 368.6mm w/o front radiator installed, up to 313.6mm with front radiator installed
Vertical GPU Mount Clearance: 40.64mm
CPU Cooler: Up to 165mm
Front Radiator: 60mm
Rear Radiator: 60mm
Reservoir & Pump: Up to 180mm (Along cable bar), Up to 86mm (Along bottom panel) |
| Compatibility |
NVIDIA GeForce RTX 30 series case compatibility chart |
| Warranty |
2 Years |
| Model Number |
CA-H510E-B1 |
| EAN |
5060301695287 |
| UPC |
815671015105 |
